| 1995 Eclipse A4 Projector Retrofit | |
) |
1. Front view of the finished headlight. Audi S4 projectors (made by Valeo) are used. |
) |
2. Here's a picture of an untouched Audi S4 Valeo HID projector. Note the openings on both sides of the projector lense. |
) |
3. Here's a picture of an untouched Audi S4 Valeo HID projector. Note the openings on both sides of the projector lense. |
) |
4. I covered the projector openeings with aluminum sheet and painted the entire cover with chrome paint. |
) |
5. Audi S4 projectors installed in the stock low-beam "bowl" so I can still use factory adjustments for headlight aiming. |
) |
6. Rear view of Audi S4 projector installed in the low-beam "bowl" |
) |
7. Top view of Audi S4 projector installed in the low-beam "bowl". The entire assembly will fit within the original headlight so everything will be weather-proof. |
) |
8. Direct frontal view of the Audi S4 projector installed in stock low-beam "bowl" |
) |
9. Another direct frontal view of Audi S4 projector installed in stock low-beam "bowl" |
) |
10. Panasonic ignitor is installed inside the headlight housing to weather-proof the high-voltage connections. It's wedged in an area that was just big enough to fit it. |
) |
11. A view of the factory low-beam rear opening. HID bulb is not installed yet. |
) |
12. HID bulb and high-voltage HID connector installed through the rear low-beam cover |
) |
13. Stock
rear cover for low-beams installed. The (low-voltage) wires you see on top
go from the external ballast to the ignitor installed inside. Bottom connector
turns on the HID through a new high-capacity relay and custom wiring harness
so the factory wiring isn't overloaded. 13) Stock amber turn-signal lense inside the headlight housing. |
) |
14. Stock amber turn-signal lense inside the headlight housing. |
) |
15. Stock amber turn-signal lense removed, but now flat gray plastic is showing. |
) |
16. Aluminum reflective tape in the turn-signal area to cover up the gray plastic, as well as to improve lighting by providing more reflective surface. |
) |
17. Picture of a stock headlight and its amber turn signal lense; for comparison purpose.. |
) |
18. New headlight without the amber turn-signal lense. Looks much cleaner! |
) |
19. Amber turn-signal bulb installed behind clear turn-signal covers. |
) |
20. Left side: upgraded 80W 9006 low beams. Right side: Audi S4 HID projector. See how much brighter the HID is? |
) |
21. Both HID projectors in action. |
) |
22. Picture of the finished headlight. The headlight opening has barely enough height for the Audi S4 Valeo projector lense. |
) |
23. Picture of the finished headlight on a bench. |
) |
24. Custom fuse block (there's room for 3 more fuses for future upgrades), with a 40A fuse and a dedicated relay to turn on the 2 ballasts. |
) |
25. Panasonic ballast mounted on the passenger side just behind the high-beam area, using a custom bracket. |
) |
26. Panasonic ballast mounted on the driver side just behind the high-beam area, using a custom bracket. |
) |
27. Headlight installed on the car. |
) |
28. Offset frontal view of both headlights installed in the car. |
| Pictures of a Bosch projector HID install | |
) |
|
) |
|
) |
|
) |
|
| 1999 Eclipse 90mm Hella HID retrofit | |
) |
|
) |
|
) |
|
) |
|
) |
|
) |
|
) |
|
) |
|
) |
|
) |
|
) |
|
| 1992 Eagle Talon A4 Projector Retrofit | |
) |
|
) |
|
) |
|
) |
|
) |
|
) |
|